A gentle sweep. A fresher, smoother look.
Rough-feeling cheeks and a shiny T-zone can leave skin looking uneven. Zero Pore Pads help lift dead skin and excess surface oil for a fresher-looking complexion.
The original AHA/BHA formula targets surface buildup that draws attention to pores. Skin feels smoother, with a cleaner, more refined-looking finish.
Use the embossed side first, turn for the smooth finishing pass, then follow with moisturiser. Keep the pressure light throughout.
The toner-soaked format, shown close up. Each original jar contains 70 pads with two complementary surfaces.
Smooth away roughness
Lift away surface buildup that leaves cheeks and forehead feeling rough. Gentle exfoliation helps reveal a smoother-feeling, more even-looking surface.
Refine the look of pores
Removing excess oil and buildup helps pores look less prominent within a cleaner, fresher-looking complexion.
A softer finishing touch
Turn to the smooth side for a soft finishing sweep, then gently pat in the remaining toner.
A simple step you can keep
Each pad is already soaked and ready after cleansing. One pad gives you both surfaces for a simple, tidy toning step.
Fresh-looking skin starts with surface care.
Oil and dead-skin buildup can dull your complexion. A gentle exfoliating step helps skin feel smoother and look fresher.
Choose these pads when visible pores and rough texture are your main concerns. Use them after cleansing and before your moisturising layers.
Look for softer-feeling cheeks and a more refined-looking T-zone. Pores and some natural texture remain a normal part of healthy-looking skin.
Start gradually, keep each sweep gentle and finish with moisture. Let your skin’s comfort guide the frequency.
Refine the surface, then leave a softer finish.
The textured side starts the exfoliating sweep, helping lift surface buildup that can make skin feel rough. Guide it lightly across the face; more pressure does not mean a better result.
Turn the pad over for the smooth finishing pass. This second surface makes the step feel softer and leaves the remaining toner ready to be gently patted in.
A light outward sweep gives rough-feeling areas focused attention while keeping the application controlled. Use the embossed side first and stay clear of the eyes and mouth.
A light, outward sweep.
Use the raised texture first for a gentle, outward sweep. This surface-refining pass gives rough-feeling areas attention while keeping the movement light and controlled.
Turn the pad. Soften the finish.
Turn the same pad for the smooth finishing sweep. Lightly pat the remaining toner into the skin before moving on.
Two surfaces, one easy step.
Each pad has an embossed side and a smooth reverse for the finishing pass. The photograph shows how to handle the pad; any accessory pictured is illustrative.
Exfoliation for texture. Conditioning care for comfort.
Manufacturer ingredient graphic. Its percentage refers to white willow bark, rather than a verified percentage of pure salicylic acid. Ingredient descriptions refer to the raw materials.
AHA and BHA help exfoliate dead skin and excess oil that can leave the surface looking dull and uneven.
Panthenol and allantoin provide conditioning care, while sodium hyaluronate supports moisture. Together, they complement the formula’s exfoliating focus.
Choose exfoliation that fits your skin, rather than layering every active at once. The original formula contains fragrance components and Alcohol Denat.; the current jar label is the best place to check anything you prefer to avoid.
Medicube Zero products can differ in format and formula. Use the original product name and your own current jar label when comparing ingredients; this listing does not substitute information from the Mild version.
AHA + BHA
Lactic acid and salicylic acid provide the original formula’s AHA/BHA exfoliating care. A specific acid concentration is not stated here.
Panthenol + allantoin
These conditioning ingredients complement the exfoliating blend, bringing skin comfort into the pore-care step.
Sodium hyaluronate
This moisture-supporting ingredient helps balance the toner’s surface-refining care with hydration.
Cleanse. Sweep. Turn. Pat.
Use Zero Pore Pads after cleansing. Four straightforward moments help you understand both sides of the pad and the care that follows.
01 — Cleanse and prepare
Begin after cleansing. Take a pad with clean hands and make sure you have a comfortable grip before starting the sweep.
02 — Use the embossed side
Glide the textured surface gently from the centre of the face outward. Avoid the eyes and mouth, and keep the movement light.
03 — Turn for the finishing pass
Use the smooth side for a second gentle sweep. Give the step your attention rather than rushing through it.
04 — Pat, close and continue
Lightly pat in the remaining toner. Close the jar to help keep the pads from drying out, then continue with the skincare steps that belong in your routine.
The official illustrated sequence: embossed side, smooth side and a gentle pat. Use frequency appropriate to your current label and skin comfort.
Make smoother-feeling skin part of an easy routine.
A good pore-care routine still leaves skin feeling cared for. Use the pads after cleansing, then give your face a comfortable moisturising finish instead of adding more exfoliation just because the skin feels oily.
If makeup tends to catch on rough patches, a consistent, gentle exfoliating step can help you work toward a smoother-looking surface. Avoid extra rubbing immediately before makeup.
Start with a frequency your skin finds comfortable. A routine that leaves your face feeling calm and moisturised is easier to keep than one that pushes too hard.
Cleanse first.
Begin with a clean face so the pad can focus on surface-refining care rather than doing the job of your cleanser.
Sweep with care.
Keep the sweep light and purposeful. Give rough-looking texture attention without repeatedly working over the same area.
Choose your finish.
Finish with hydration to help skin feel soft and comfortable. Pore care and moisture belong in the same routine.
Make sun care part of the plan.
An AHA-containing cosmetic can increase sensitivity to sunlight. Use sunscreen, protective clothing and sensible sun-exposure habits during use and for a week afterward, following the relevant label guidance.
Before introducing the product, try it on a small area and check your skin’s response. Avoid irritated or freshly shaved areas. If use causes irritation, stop and follow the advice on your packaging. Thoughtful application includes both the sweep itself and the care that surrounds it.
70 pads per jar. Two complementary surfaces.
Each original jar holds 70 pre-soaked pads with a net content of 155 g. Both surfaces are on every pad, ready to use after cleansing.
The Mild pads are a separate product with a different formula. Compare the exact name and ingredient list before switching between versions. The information for another version should not replace the directions for this jar.
Product photographs help you see the pad texture, jar and application experience. Refer to the stated selection for what is included, and to the supplied packaging for current product details.
Pre-soaked toner pads
70 pads / 155 g per jar
Open and closed jars are shown together to explain the packaging.
Original Zero Pore Pads
The blue-lid original AHA/BHA toner-pad format described throughout this guide. Match the product name, pack size and current ingredient list to the jar you receive.
Zero Pore Pads Mild
Mild is a separate formula in the wider Medicube range. Its ingredients and supporting claims should be read through its own product information. It is not the variant sold on this listing.
See the jar. Understand the format.
Explore the pad texture, two-sided design and resealable jar. Close the lid after each use to help keep the remaining pads moist.
Prepared for your routine.
A close-up view of the toner-soaked pads. Take the pad you need and keep the remaining stack inside the closed jar.
Texture you can recognise.
The embossed surface begins the sweep. Turn that same pad for the smooth finishing pass.
Each original jar holds 70 pads.
The original blue-lid AHA/BHA format. Close the lid after each use to help keep the pads from drying out.
Smooth texture feels better with a moisturised finish.
After exfoliating, choose a moisturiser that makes your skin feel comfortable. That final layer helps you enjoy a softer finish instead of leaving the routine at the cleansing and refining stages.
A fresh-looking complexion is about balance: a considered exfoliating step, enough moisture and everyday sun care. You can keep that balance simple.
Prefer a jelly texture?
A jelly moisturiser can be an appealing finish when you enjoy light-feeling hydration and a dewy look. Read the cream’s own directions before adding it to your routine.
Enjoy a richer cream?
If your cheeks tend to feel dry, a richer cream may give you the comforting final layer you prefer. Match the amount to how your skin feels.
Know the product. Choose with confidence.
What can Zero Pore Pads do for my skin?
They help lift surface buildup and excess oil for smoother-feeling skin and a fresher, more refined-looking complexion. Use a gentle sweep and introduce them gradually according to your skin’s comfort.
Are the two sides separate products?
Both surfaces are on each pad. Begin with the embossed side, then turn it for the smooth finishing pass.
Where does the pad step belong?
Use after cleansing. Pat in the remaining toner and continue with your following skincare steps.
Can I press harder for a stronger result?
Keep the pressure gentle. The directions describe a light sweep; vigorous rubbing is not part of the application sequence.
How often should I use them?
Follow your current packaging and introduce the product gradually. Let comfort guide how you build the step into your routine.
Are original Zero Pore Pads the same as Mild?
They are different formulas. Check the exact version when comparing the product information or making another purchase.
Where can I check every ingredient?
Read the complete current list on the packaging. The highlights in this guide introduce the formula, while the full list gives you more detail.
Does Medicube Global offer international shipping?
Yes. Medicube Global offers international shipping to all countries worldwide.
Is shipping fast?
Yes. Orders ship from South Korea after one business day of preparation. Delivery usually takes 1–3 days after dispatch. We cover shipping, customs duties, import taxes and carrier fees. Arrival can vary with the destination, customs processing and carrier conditions. Read our Shipping Policy for delivery support.
Where can I ask a product or delivery question?
Contact Medicube Global with the product name or your delivery destination. A clear question helps us understand the information you need. Visit our Contact Us page to get in touch.
A fresher complexion starts with gentler pore care.
Make smoother-feeling skin part of your routine. Lift away surface buildup and excess oil with a light sweep, then finish with moisture for a fresh, refined-looking complexion.
